background image

THE 

SCIENCE

 

BEHIND HEAT

Instructions for Use

Before First Use

When using this PTC Tower Heater for the first time, a slight odour may be emitted. This is 
normal and will subside after a few uses. 
Place the PTC Heater on a flat, stable, heat-resistant in an open space, at least 120 cm away 
from furniture, walls, objects, curtains or any other flammable materials.  
Check that the air intake is not blocked.

Using the PTC Heater 

Position the PTC Tower Heater on a flat, stable, heat-resistant surface, at least 120 cm from 
walls, objects and furniture.  
Plug the PTC Tower Heater into the mains power supply. 
Turn on the ‘On/Off’ switch on the base of the PTC Tower Heater, then press the ‘On/Off’ 
button on the control panel. 
Press the ‘Fan’ button to operate the fan system. The PTC Tower Heater will blow out cold air. 
Select the desired heat setting using the heat setting switches. For a low heat setting, press one of 
the heat setting switches. For a high heat setting, press down both of the heat setting switches. 
To use the oscillation function, press the ‘Oscillation’ button. 
To turn off the PTC Tower Heater, switch off the ‘Fan’ button, both heat setting switches and 
the ‘On/Off’ button on the control panel. Switch off the ‘On/Off’ switch at the base of the PTC 
Tower Heater and then unplug the heater from the mains power supply.

Thermal Safety Cut-Out

This PTC Tower Heater is fitted with a thermal safety cut-out system, built-in to prevent it 
overheating. Should the PTC Tower Heater start to overheat, the thermal safety cut-out system 
will automatically operate and the PTC Tower Heater will switch off. The PTC Tower Heater 
will only resume normal operation when it has been manually switched back on. 
When the thermal safety cut-out activates, the PTC Tower Heater should be left to cool for 
approximately 30 minutes before using again. 
Before turning the PTC Tower Heater back on, check that there is nothing obstructing the 
airflow or blocking the air intake and that the PTC Tower Heater has been placed at least 120 
cm away from walls, objects and furniture.

EH0933 PTC Tower Heater

7

Summary of Contents for EH0933











Reviews: