Beldray EH0933, Instruction Manual

THE 

SCIENCE

BEHIND HEAT

Class II Wiring

Connection to the mains

Please check that the voltage indicated on the product corresponds with your supply voltage.

Important

As the colours in the mains lead of this appliance 
may not correspond with the coloured markings 
identifying the terminals in your plug, please 
proceed as follows:
The wires in the mains lead are coloured in 
accordance with the following code:
Blue Neutral (N)
Brown Live (L)
FOR UK USE ONLY - Plug fitting details 
(where applicable).
The wire coloured BLUE is the NEUTRAL wire and must be connected to the terminal marked 
N or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal marked L 
or coloured RED.
On no account must either the BROWN or the BLUE wire be connected to the EARTH 
terminal (    ).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and conforming to BS 1362 
and be ASTA approved.
If in doubt consult a qualified electrician who will be pleased to do this for you.

Non-rewireable mains plug

If your appliance is supplied with a non-rewireable plug fitted to the mains lead and should 
the fuse need replacing, you must use an ASTA approved one (conforming to BS 1362 of the 
same rating).
If in doubt, consult a qualified electrician who will be pleased to do this for you.
If you need to remove the plug - DISCONNECT IT FROM THE MAINS POWER SUPPLY and 
then cut it off the mains lead and immediately dispose of it safely. Never attempt to reuse the 
plug or insert it into a socket outlet as there is a danger of an electric shock.

9