background image

6

Assembling the 9 Inch Desk Fan
Assembling the Desk Fan

STEP 1: Remove the plastic rear grill locking nut by twisting it in an  

anticlockwise direction. 

STEP 2: Place the rear grill over the motor assembly pin so that it is aligned 

with the four plastic pins. 

STEP 3: Add the grill locking nut, twisting it in a clockwise direction to secure 

the rear grill into position. 

STEP 4: Place the fan blade unit onto the motor assembly and push until it is 

locked into position. 

STEP 5: Open the clips around the outer edge of the front grill and position it 

onto the rear grill. Fasten the clips around the outer edge of the front grill to 

lock the grills into position, so that the blade and motor unit are protected. 

STEP 6: Insert the grill screw through the hole at the bottom of the front and 

rear grill, then place the nut onto the grill screw and tighten it in a clockwise 

direction to secure the grills together.

Note: Do not overtighten the rear grill locking nut.

Instructions for Use

Before connecting to the mains power supply, place the assembled desk fan 

onto a flat, stable surface, allowing for sufficient distance between the desk fan 

and any objects that could get damaged or caught in the rotating fan blades.

Using the 9 Inch Desk Fan

STEP 1: Plug in and switch on the desk fan at the mains power supply. 

STEP 2: To turn on the desk fan, select the desired cooling speed by pressing 

‘1’or ‘2’. Speed setting ‘1’ is the lowest cooling speed setting; ‘2’ is highest 

cooling speed setting. 

STEP 3: To tilt the fan head, position as desired. The locking mechanism will 

hold the head in the set orientation. 

STEP 4: Activate the oscillation function by pushing the oscillation switch; the 

desk fan will begin to oscillate. To stop the desk fan from oscillating, pull up the 

oscillation switch. 

STEP 5: Turn off the desk fan by pressing ‘0’.

Caution: Do not cover the fan head.

Summary of Contents for EH2658SSTK













Reviews: