Man Down
When this feature is enabled, the radio automatically sends an alarm for help if it
is positioned aslant or keeps motionless long time. If the trigger type is set as
Only Lean, the radio tilts to a specified gradient
（
30°,45°,60°
）
within a preset
period, the radio gives alerts, you can terminate such alerts by put radio upright
otherwise it will enter Emergency mode; If the trigger type is set as Only Motion
Detection, the radio stays motionless within a preset period, it will enter
Emergency mode, via the programming software to enable this feature and to set
parameters.
Via programmable software to set it: Signaling Systems folder→Upend →Upend
Enable→Enter Delay→Exit Delay→Upend Pre Warning Time→Trigger Type→
Trigger Gradient
Note: Man Down is an optional feature.
GPS Positioning
The GPS Positioning function allows you to view your location information, GPS
data include time, date, longitude, latitude, speed, altitude, and number of
available satellites. While enable GPS, the radio will transfer its positioning
information automatically to the center if connect counts or PTT counts is
reached. GPS data also can be manually transmitted to an individual user.
● Query Location information of another radio user
①
Transceiver A enable GPS function and set GPS query command as: GPS
②
Transceiver B enter New SMS menu and edit text message:”GPS” then send
to transceiver A.
③
Transceiver A received message from transceiver B, then send GPS data to
transceiver automatically.
④
If transceiver A GPS data is invalid, the transceiver B will receive: No GPS
Data.
Via programmable software to set it: GPS Setting folder→Mode→Connect Count
→PTT Count→Control Center ID→Command
Note: GPS Positioning is an optional feature.
Via programmable software to set it: Signaling Systems folder→Work Alone→
Work Alone Enable→Work Alone Response Time→Work Alone Warn Time→
Work Alone Response Operation
Note: Alone Worker is an optional feature.
19
