TX Permission
Digital Channel
This feature can restrict the channel if it is already in use you will be unable to
transmit. There are three options available: always, color code free, channel free,
if choose always, whenever press PTT key to transmit directly; If choose color
code free, you will be unable to transmit on the channel if the color code is
already in use; If choose channel free, you will be unable to transmit on the
channel if it is already in use. If the channel is busy, press PTT key a warning
tone will sound.
Via programmable software to set it: Channels folder→Zone→a digital channel→
TX Parameters→Admit Criteria
Analog Channel
This feature can restrict the channel if it is already in use you will be unable to
transmit. There are three options available: off, carrier, CTCSS/CDCSS, if
choose Off, whenever press PTT key to transmit directly; If choose carrier, you
will be unable to transmit on the channel if the channel is being used by others; If
choose CTCSS/CDCSS, you will be unable to transmit on the channel if it is
already in use and the CTCSS/CDCSS code in use. If the channel is busy, press
PTT key a warning tone will sound.
Via programmable software to set it: Channels folder→Zone→a analog channel
→TX Parameters→BCL
Battery Saver
This function allows an idler radio to automatically enter battery saver mode, the
mode will extend battery service life, but response time may be delayed. You can
set battery saver time ratio as : 1:1
、
1
:
2
、
1:3
、
1:4, the time rate is smaller, the
power saving more evidently.
Via programmable software to set it: General Setting folder→Battery Saver
Low Battery Warning
When your battery gets low, LED indicator glows red and with a warning tone:
“Please Charge”
，
please replace the battery or charge the battery in time. The
radio will turn off automatically while battery is too low.
Via programmable software to set it: General Setting folder→RX low battery
internal
21
