Call and receiving on analog Channel
On analog channel press and hold down the PTT key to transmit, LED indication
glows red, speak into the microphone, and hold the palm microphone
approximately 3 to 4 centimeters away from your mouth.
Button Configuration
Use the customer programming software to configure orange button, button1,
button2 to pressing and holding-down operation.
Programmable buttons are including functions listed below:
09
1
3
4
5
6
7
8
10
11
12
13
14
Unassigned
Emergency on/off
Monitor
Scan on/off
All alert tone on/off
Battery Indication
Zone Toggle:
Power Switch
Repeater/talk around
Vox on/off:
Nuisance Delete
Permanent Monitor
The key is not assigned with any function
Allow user to make an emergency call
Enable monitor function.
To enable or disable the scan function.
To enable or disable all alert tones
Quick to view battery capacity
Quick access to [Zone Toggle]
To switch High/Middle/Low Power quickly
To enable or disable talk around quickly
To enable or disable VOX quickly
To temporarily ignore unwanted channel activity
To enable or disable permanent monitor function
2
9
One Touch Call 1~6
AD Switch
To quick access a service as: group call,
private call, private message, group message,
and call alert.
To temporarily switch channel mode to AD or DA
on digital analog compatible channel.
