19
While select a contact as private call, a private call can view its detail, send message, send call
alert, send device check, send remote monitor, disable or enable, edit name or number, or delete.
●
Details: View ID of a private call contact.
●
Send SMS: It’s convenient to send message.
●
Call Alert: Call alert is used for prompting the private receiver; ask them respond to transmitter if
communication is available. While receiving call alert command the radio will generate alert tone.
●
Device Check
：
This function can check if the target radio is active in the system while don’t send
any tone alert to the target device.
●
Remote Monitor: Allow a user to send a "Remote Monitor" request to the target device via menu.
If the request is successful, you can enable the microphone of the target radio, and monitor its
activities. Only the target radio is set remote monitor decode, that enable monitor its activities.
●
Device enable : Allow a user to send "Device enable" command to the target killed device, to
allow it to be used normally.
●
Device Disable: Allow a user to send "Device Disable" command to the target device via menu. If
the device is lost or stolen, a user can use this function to disable the device. However, this device
will continue monitoring air interface to receive its "Device Enable" command.
●
Edit Name: Modify the name of a private call contact. Press” *” key to delete, press “#” to switch
input method, name input 16 characters at most.
●
Edit No: Modify the number of a private call contact, the available number range is 1~16776415.
●
Delete: Delete unwanted contacts from the address list, if private call contact is set as channel
default address or call number on one touch call, its unable to delete.
3. All Call
While the contacts type as all call, you can select the menu to view its ID or press PTT to call.
4. New Contact
You can add a private call contact to the contact list. First input number, the available number
range is 1~16776415. Then input name, when edit name, press” * ” key to delete, press “#” to
switch input method, name input 16 characters at most;, After add a private call contact successfully,
on contacts list will show new contact.
5. Manual Dial
