20
You can manually input the private call number for calling or sending message, send call alert,
device check, remote monitor, device enable, device disable.
Scanning
1. Scan On/Off
While current channel add scan list and the list contain 2 channels at least, you may enable the
feature. Scanning allows the device to search the scan list connected to the current channel to locate
qualified channel for receiving or voicing. During scanning, the icon “
”flashes, when activities
are detected on a channel, the radio will stay on the channel to receive current activities. To exit the
scanning process, enter scan menu, switch channel or press the programmed Scan On/Off key.
Note
：
If the channel enables the feature “Auto Scan” via the programming software, switch to the channel will enter
scanning automatically;
While programmable button programmed as Scan on/off, press it to enable scan feature.
2. View/Edit List
Allow a user to view/edit the scan list via menu, user can view members of the scan list, or edit
priority of members; Also allow a user to add a new member to the scan list, the list contain 16
channels at most. Delete menu will remove a member from the scan list.
Note:
If the channel is set as scanning priority channel, on the right of the scan list appears icon:
or
.
Zone
The transceiver supports up to 50 zones, each of zone supports 16 channels, totally 160
channels supported. Enter “Zone” menu to select a desired zone. On programming software, the
members’ channel of zone is the valid channel.
Note:
Only contain 2 zones at least, the zone menu is visible.
Text Message
1. Inbox
