22
3. Outgoing Call
The outgoing calls list can save up to 20 entries, when the memory for call logs is full, the
oldest entry will be deleted automatically. You can add it to contact list or delete it. Delete All will
remove all outgoing calls.
Recording
While activated voice recorder, it will continuously record all transmitted and received signals.
There are 2 Rec modes available: compress or uncompress the compress mode can reduce memory
but uncompress mode can make the quality of audio excellent. While recording on and work
normally indicate by:
, if recording mode work abnormally indicate by:
. On Voice Records
menu input date can view or play the voice memo. For 30 minutes recording a voice memo, the
suffix of memo as 0 represents uncompress, 1 represents compress. While terminal switches to
U-Disk mode, the voice memos can download to PC to play.
Note:
On digital channel, if the work mode is duplex and transmitting private call, while enable recording feature,
the record mode is enforcement of uncompress mode.
Setting
1. Settings
Allow a user to perform basic settings for the transceiver.
●
Talk Around: When your repeater malfunctions, or when radio is out of repeater’s range, you can
continue to communicate in talk around mode. While enable talk around feature, the screen displays:
，
By this time TX frequency the same as to RX frequency. If switch channel, enable scan feature
or restart radio will disable the feature.
●
Tone/Alerts: To set tones for your radio, tone alerts include settings of all tones, call alert tone,
SMS tone and keypad tone. If disable all tones, all alerts will be off except emergency tone.
●
TX Power : Allow a user to change the power level, there are two levels available: high (indicated
by H) and low (indicated by L).
●
Backlight: To set the backlight parameters, you can select on or automatic,
●
Boot Interface: Allow a user to enable or disable the boot screen via menu. If the Intro screen is
