10.Please contact the seller if you find other problems not covered in this operation manual.
11.The heater must not be located immediately below a socket-outlet
CLEANING AND MAINTENANCE
Always turn off and unplug the heater before cleaning.
To clean the heater use a damp cloth and make sure to dry excess water oncecleaned.
ATTENTION
Do not put the heater directly into any container with water in it.
TROUBLE SHOOTING
1.If the heater does not emit heat after turning on, please check the power cord whether plugged into electric
socket properly.
2.In first use, it is normal if the heater appears small amount of smoke and some smell because of protective-
oil evaporate
CLEANING AND MAINTENANCE
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble
free years. To clean your heater follow steps below:
1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing.
3. To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may
use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION:
DO NOT let liquids enter the heater).
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt
build up. Use packaging carton to store.
ATTENTION:
1. Always disconnect the heater from the electricity supply and allow it to cool before
attempting to work on it.
2. If the heater has collected dust or dirt inside the unit or around the heating element,
have to unit cleaned by a qualified service agent. Do not operate the heater in this
condition.
3. The only maintenance required is cleaning of the external surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue from your hand could
affect the life of the lamp. If it is accidentally touched, remove the finger marks with a
soft cloth moistened with mentholated spirit or alcohol.
5. Do not attempt to repair or adjust any electrical or mechanical functions on this heater.
6. The heater contains no user serviceable parts. Should the product suffer
damage or breakdown, it must be returned to the manufacturer or its service
agent.
