������
��������
��������
������
�
�
�
�
�
�����
11
Connecting your Router
11
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
Connecting your ADSL Line
Connection for the Router to the ADSL line varies by country and region.
Typically it involves a microfilter or a microfilter with built-in splitter to allow
simultaneous use of ADSL service and telephone service on the same telephone
line. Please read the following steps carefully and select appropriate method.
1.
If your telephone service and ADSL service are on the same telephone
line, ADSL microfilters are needed for each telephone and device, such as
answering machine, fax machine, and caller ID display. Additional splitters
may be used to separate telephone lines for telephone and the Router.
Note: Do not connect the ADSL microfilter between the walljack and the
router. This will prevent ADSL service from reaching the modem.
2.
If your telephone service and ADSL service are on the same telephone
line and you are using an ADSL microfilter with built-in splitter, connect
the splitter to the telephone wall jack providing ADSL service. Then,
connect the telephone cord from the ADSL microfilter RJ11 port
generally labeled “DSL” to the gray RJ11 port labeled “DSL line” on the
back of your Router. Connect telephony device to the other port on the
ADSL splitter commonly labeled “Phone”. An additional ADSL microfilter
is needed for another telephone and device on the same line.
Note: One RJ11 telephone cord is supplied. When inserting an RJ11
plug, be sure the tab on the plug clicks into position to ensure that it is
properly seated.
