Belkin F5U004, User Manual

2.A window will appear asking for 'Typical Installation' or 'Advanced Installation'. It is
recommended that you select ‘Typical Installation’. If you select 'Typical Installation' proceed
with the following steps below. If you select ‘Advanced installation’, the Windows 98/95
Network Control Panel will be launched and you will need to install the Belkin Direct Connect
Network Adapter drivers manually.To install the Network adapters manually see Section 5. Click
OK.

3.A window will appear asking for a Computer Name.  The Computer Name is user defined. The
Computer Name that you assign should be unique for each computer (e.g. Computer 1, Computer
2, PC1, PC2, PC3, Jonathan, Winston, Majid, Chris, Melody, Justin, Derek or Ferdi). Type one in
and click next.

4.A window will appear asking for a Workgroup name. The Workgroup Name is user defined .
Use only one Workgroup name for all computers( e.g. Home Computers , Office Computers or
Tech Support ) . That is, the Workgroup  name on all the computers  should be exactly  the same .
Type one in and click Next.