11
Features and Usage
(continued)
If your printer has been installed previously on the local parallel
port of your computer (LPT1 – the one on the back of your
machine), you can now free up that parallel port and connect
your printer to the ExpressBus
™
Plus. To do that, you must tell
Windows
®
that the printer is attached to a new port. Click on
“Start”, select “Settings” and right-click on your printer.
Choose “Properties” and click on the “Details” tab:
In the “Print to the following port:” box, make sure you select
“PB1284-1”. Click on OK to save your settings.