background image

WARRANTY AND LICENSE
Belkin Components warrants this product to be free from defects in
material, content, and workmanship for life. If a defect is discovered,
Belkin will, at its option, repair or replace the product at no charge.
Proof of purchase may be required.  
The CATC software is licensed for use on a single PC. The software
may be copied for backup purposes only.
This warranty covers all defects in material or workmanship. It does not
cover accidents, misuse, neglect, unauthorized product modification, or
acts of nature. Belkin Components shall not be liable for damage to
other property caused by any defects in this product, damages based
upon inconvenience, loss of use of the product, loss of time or data,
commercial loss, or any other damages, whether incidental,
consequential, or otherwise.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause
harmful interference to radio or television reception, the user will be
responsible to correct the interference at his own expense. 
Note 1: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. 
Note 2: Shielded interface cables must be used in order to comply with
the emissions limits.

Contacting Belkin Components:
Sales

310.898.1100

Technical Support

310.898.1100 ext.2263

Web Site

www.belkin.com

E-mail

sales@belkin.com
Support@belkin.com

Version 1.3a September 30, 1998 Copyright 1998. All rights reserved. No part of this manual may be
copied, photocopied, reproduced, translated, or reduced to electronic medium or machine-readable
form without prior written consent from Belkin Components.

12

Warranty and License

Summary of Contents for F5U111















Reviews: