4
2.2 Supplied Components
The following components are included:
• Belkin USB Ethernet Adapter device
(Specifications are outlined in Section 7)
• Belkin USB cable, 6'
• Software installation diskette
• Belkin USB Ethernet Adapter User Manual
2.3 System Setup
The USB cable is provided; you provide the network cable.
Caution: If you choose to use a USB hub, the hub must be
externally powered. You cannot use a bus-powered hub.
In order to use the adapter, you must install drivers in the USB host
PC, as described in the following sections. In addition, you need to
configure the network parameters.
You will need a network (Ethernet) cable, and your original
Windows
®
98 CD.
2.4 Cable Connections
Figure 2-1 illustrates the provided USB cable connection from the
PC (A connector) to the adapter (B connector), and a standard
10Base-T Ethernet cable connection from the RJ45 connector on
the adapter to an Ethernet port. When prompted in the installation
procedure follow any of the following connections:
USB Specifications
