29
Using the Belkin Wireless Network Utility
29
se
ct
io
n
1
2
3
4
5
6
Step 3
– The next screen allows
you to select the encryption
key “Input Method” using
alphanumeric, hexadecimal, or
passphrase. Most WEP encryption
keys are hexadecimal consisting of
letters A through F and numbers 0
through 9. The method you choose
should match the same method
used by the router (or access
point). Select the “Input Method”,
enter in the key and select 1, 2, 3,
or 4 from the “Key Index”.
Step 4
– Click “Complete” to save
the security settings and the new
profile. To begin using your new
profile, highlight the profile name
by clicking on the name one time,
then click “Connect”.
Connecting to a Wireless Network using WPA-PSK (no server):
To enable the security settings for the Card, you must select a network
from the “Available Networks” tab or a profile from the “Profiles” tab
and follow steps 1-3 of “Setting up Wireless Network Profiles” on page
18 before continuing.
Step 1
– Select “WPA-PSK”
from the “Authentication Mode”
drop-down box.
