background image

Safety Precautions

Warning – Grounding and Polarization

This product must be plugged directly into a grounded AC power outlet (3-
prong). Do not use a 3-to-2-prong adapter to defeat the grounding pin. Do not 
plug or “daisy-chain” this product into other electrical products such as surge 
protectors, power strips, or UPSes. Do not plug this product into an extension 
cord. Failure to plug this product directly into a grounded outlet may result in 
personal injury or damage to your equipment. 
Call a licensed electrician if you are unsure that your AC outlets are 
properly grounded.

Warning – Rooftop Antennas and Satellite Dishes

If you use rooftop antennas, satellite dishes, or any other rooftop hardware that 
connects to your PureAV Power Conditioner, make sure the wires are properly 
grounded. This will protect against voltage surges from lightning strikes or 
static charges.

Warning – Lightning Storm Protection

Although your PureAV Power Conditioner is built to withstand large power 
surges, we cannot guarantee that it will protect all of your equipment in the 
event of a large lightning storm. In the event of a lightning storm, it is best to 
unplug your Power Conditioner from the wall. Once you have done this, there is 
no need to unplug any of the equipment that is connected to the 
Power Conditioner.

Warning – Water and other Liquids

Do not use this product with aquariums or other water-related products. Use 
indoors and in dry locations only. Do not operate the Power Conditioner if any 
liquid is spilled on or in the unit. Failure to follow these guidelines could result 
in serious bodily injury or death.

Warning – Cleaning

Always unplug the Power Conditioner before cleaning. It is only necessary to 
clean the Power Conditioner with a clean, dry cloth or duster. Do not use any 
cleaning solutions, sprays, or water.

Warning – No User-Serviceable Parts Inside

If, for any reason, your Power Conditioner is malfunctioning, do not attempt to 
repair or dismantle the unit in any way. Unplug the unit and consult this User 
Manual for warranty and service contact information.

Pur
eA

V P
ow

er C
onditioner

5

Summary of Contents for P74521-B

















Reviews: