Belkin P74521-B, User Manual

Hookup and Installation

Step 2 
Connect Audio Components to the Audio Filter (switched)

Certain components do not need to be, or should not be, powered on at all 
times. For this reason, the audio filter outlets are “switched” and can be 
controlled with the button situated on top of the Power Conditioner unit 
labeled “Switched”. When you depress and hold this button for approximately 
two seconds, the “Switched On” light will illuminate and power will flow to the 
switched outlets. To turn off the switched outlets, simply push and hold the 
“Switched” button again until the “Switched On” light is extinguished. Power will 
stop flowing to the switched outlets.

A.

   Attach PureAV power cord labels to each component’s power cord before 

you plug the cord into the corresponding outlet on the 
Power Conditioner.

B.

   Receiver (Preamp) – Connect your receiver or preamp power cord to the 

outlet labeled “Receiver”.

C.

   Tape – Connect your tape player power cord to the outlet 

labeled “Tape”.

D.

   CD – Connect your CD player power cord to the outlet labeled “CD”. (PF30L, 

PF31L only)

E.

   Auxiliary 01 – This outlet can be used to connect any other audio equipment 

you may have. (PF30L, PF31L only)

F.

   Amp – Connect your main amplifier power cord to the outlet labeled “High 

Current AMP”. This outlet is specifically designed to deliver high current 
to power-hungry amplifiers. (The PF40L has two high-current outlets for a 
secondary amp.)

Step 3 
Connect Video Components to the Video Filter (always on)

Certain components should be powered at all times. For this reason, the video 
filter outlets are “always on” or un-switched, and constantly receive power as 
long as the Power Conditioner is plugged into an AC power source (wall outlet).

A. 

 Attach PureAV power cord labels to each component’s power cord before 
you plug the cord into the corresponding outlet on the 
Power Conditioner.

B. 

 Cable/Satellite – Connect your cable or satellite receiver power cord to the 
outlet labeled “Cable/SAT”. (PF30L, PF31L only)

C.

  VCR – Connect your VCR power cord to the outlet labeled “VCR”.

D.

   DVD – Connect your DVD power cord to the outlet labeled “DVD”. (PF30L, 

PF31L only)

E. 

 TV – Connect your TV or monitor power cord to the outlet 
labeled “TV/Monitor”.

F. 

 Digital Video Recorder – Connect your digital video recorder power cord to 
the outlet labeled “DVR”. (PF31L only)

G. 

 Auxiliary 02 – This outlet can be used to connect any other video equipment 
you may have. (PF30L, PF31L only)

Pur
eA

V P
ow

er C
onditioner

7