Copiscan 8000 Plus Series Operator Manual
www.bellhowell.imagingcomponents.com
August 25, 2000
1-800-SCAN495
3
1.2
Symbols You Should Know
You will see three types of symbols in this manual: a warning symbol, a caution symbol,
and a note symbol. Each time a symbol appears in the manual, it is followed by important
information that you should read carefully.
The three symbols look like this:
WARNING:
This symbol identifies a hazard or procedure that could cause bodily injury or loss of
life if performed incorrectly. When you see this symbol, be sure to read all the
information in the section before you continue.
CAUTION:
This symbol identifies a hazard or procedure that could damage or destroy equipment
if performed incorrectly. When you see this symbol, be sure to read all the information
in the section before you continue.
NOTE:
This symbol identifies important information that requires special attention. When you
see this symbol, be sure to read all the information in the section before you continue.
1.3 Safety
Guidelines
Please read the guidelines below before you operate or maintain the scanner. Any
machine can be dangerous to you or to others if you do not know how to use it safely.
Follow the safety guidelines in this manual exactly.
•
Make sure all electrical outlets are properly grounded.
•
Do not, under any circumstances, remove or obstruct the function of any safety
feature.
•
Observe all precautions printed on the scanner’s safety labels and in this user manual.
•
Read the Section 4,
Installation
, before connecting the scanner to the power line.
•
The socket outlet must be installed near the equipment and must be easily accessible.
•
Make sure the scanner is connected to the correct voltage before connecting it to the
power line.
