1 Introduction
S008459 Rev C
Page
13
of 117
Figure 1.27: Scanner clearance
Caution
Not following the above recommendations can decrease performance levels and
shorten operational life (see also section
1.1 Safety Notes
).
Place the Infinity WF on the floor stand for the best ergonomic position while using the scanner.
If the floor stand will not be used with the Infinity WF, place the scanner on a flat and solid base.
The load bearing capacity of the base, table or stand must correspond to the weight of scanner.
Choose a location that complies with the limits of temperature and humidity (refer to section
2
System Specifications
).
1.6 Connecting
Power
Warning
Before connecting the Infinity WF scanner to a wall outlet check the following items:
•
Ensure the wall outlet is in perfect condition and that it is properly grounded.
•
Ensure that the wall outlet is equipped with a fuse with the proper capacity.
•
The electrical outlet must be near this device and must be easily accessible.
•
Power the scanner OFF (see
1.6.1 Powering ON/OFF
) before plugging or
unplugging any cables.
•
Use only the power cable delivered with the scanner.
•
Inspect the power cable and ensure that it is not damaged.
