4 Setup and Performance Optimization
S008459 Rev C
Page
29
of 117
Exit Self Test
Tapping the
Exit Self Test
button finalizes the Setup mode, switches to the Operation mode,
and displays the Main Menu.
Figure 4.7: Operation mode - Main Menu
4.1.2
Self Test 2 Screen
Figure 4.8: Self Test 2 screen
The following functions are accessed from the Self Test 2 screen: Touch Adjust; Touch Test;
Stitch Test; EMV Test; Sensor Test; and Shutdown Scanner.
To access the Self Test 2 screen, tap the
More
button found on the
Self Test 1 screen
.
Touch Adjust
Note
It is recommended to read all instructions before proceeding.
The Touch Adjust function defines the dimension of the writing area of the Touch Screen. The
first step after selecting this function must be done very quickly to activate the adjustment
procedure.
To complete the Touch Adjust procedure, perform the following:
1. Tap
the
Touch Adjust
button on the Self Test 2 screen, and immediately tap and hold your
finger on the Touch Screen. The first message on the screen (
“Touch adjustment? Don’t
