7 Web-based Interface
S008459 Rev C
Page
69
of 117
3. Change the IP Address and click the
APPLY
button (connection to the scanner will be lost)
4. Close the Internet browser
5. Power cycle the scanner using the
power switch
and return the
Touch Screen
to the
Main
menu
6. Using a remote PC, open an Internet browser and enter the scanner’s new IP address (
step
3
above) into the address bar of the Internet browser window. Communication is
successfully established when the
Home Page
of the Web-based Interface is displayed
Adjust Time & Date Button
Clicking the
Adjust Time & Date
button displays the Adjust Time & Date screen, from which the
time and date information used by the Infinity WF scanner can be set and/or adjusted. This can
be done manually, or using NTP (Network Time Protocol). NTP is a protocol designed to
synchronize the clocks of computers over a network.
By default, the name of a scanned image contains the scan time and date, therefore
synchronizing the internal clock can be important.
Figure 7.15: Adjust Time & Date screen
Note
For further information on NTP or to setup an NTP server, see your IT/Networking
personnel. The BBH Help Desk does not assist with setup or configuration of your
local network.
Sound System Button
Clicking the
Sound System
button displays the Sound System screen, from which three
controls are accessible:
Set Volume
;
Wave Files
; and
Link Events
.
Figure 7.16: Sound System screen
