INTUITY CONVERSANT System Version 6.0
MAP/100 New System Installation
585-310-176
Issue 3.0
June 1997
Verifying System Status
Page 5-18
Backing up the I
NTUITY
CONVERSANT System
5
The system displays the following message:
Creating the recovery volume...
This operation can take from minutes to hours depending
upon the speed of the tape drive being used.
For example:
Wangtek 525MB QIC drive - 12MB/min = 720MB/hr
Tanberg 2.5GB QIC drive - 17MB/min = 1GB/hr
Backing up X hard drive.
System backup operation completed successfully.
QuickStart will now verify the backup.
While EST recommends that you verify each backup, this
is an optional process.
Enter V to verify or S to skip [V/S]:
!
CAUTION:
Entering
v
will cause the system to verify the tape using the backup
floppy. This procedure will take approximately two hours. During
this time the system will be out of service.
10. Enter
s
The system displays the following message:
Verification Skipped!
You may verify a QuickStart tape at any time by using
option 4 from the main QS menu.
Press [ENTER] to return to the main menu.
11. Press
The system displays the BRU Main Menu Screen (
12. Remove the “QuickStart” boot diskette from the diskette drive.
13. Enter
9
14. The system reboots to the I
NTUITY
CONVERSANT system.
15. Verify the root backup tape while the system is in operation. See
“
“ below for the procedure.
ENTER