INTUITY CONVERSANT System Version 6.0
MAP/100 New System Installation
585-310-176
Issue 3.0
June 1997
Verifying System Status
Page 5-4
Feature Test Script Package
5
9. Select
10. Press .
The systems prints a copy of the Display Feature Licensing screen
(
Feature Test Script Package
Use the Feature Test Script package to verify the following features and
capabilities of the voice system:
■
Playback and coding
■
Chantst
■
Transfer test
This script works on Tip/Ring channels.
Feature Test Script Package Prerequisites
The required voice system and PBX configurations for testing features are listed
below. All lines from the PBX must be configured and operational before running
the script to test features. Playback and coding, chantst, and transfer test require
at least one Tip/Ring channel.
■
Playback and coding
— At least one Tip/Ring circuit card must be installed.
— Tip/Ring lines must be in the INSERV state.
— There must be room on the speech disk slice to store a 45-second
phrase.
■
Chantst
— At least one Tip/Ring circuit card must be installed.
— Tip/Ring lines must be in the INSERV state.
— Circuit cards can only have terminating resistors at each end of the
bus ribbon cable. All Tip/Ring cards that are not on the bus ribbon
cable must not contain terminating resistors.
■
Transfer test
— At least one Tip/Ring circuit card must be installed.
— Tip/Ring lines must be in the INSERV state.
ENTER