INTUITY CONVERSANT System Version 6.0
MAP/100 New System Installation
585-310-176
Issue 3.0
June 1997
Verifying System Status
Page 5-8
Feature Test Script Package
5
Figure 5-7.
System Monitor-Voice Channels Screen
2. Dial the telephone number associated with the assigned channel.
NOTE:
The touch tones on the telephone are used to access
feature_tst
.
The voice system plays the following:
“Follow all touchtone entries with pound. Continue testing.
To quit the script, enter 0 pound.”
The voice system then plays the list of features with the corresponding
number to enter to test each feature.
3. Select a feature using the telephone’s touch tone pad.
4. Press the number that corresponds to the feature you want to test and
then press
.
5. Follow the prompts to complete the test for each selected feature.
Changing the State of Voice Equipment
To change the state of voice equipment:
1. Start at the Voice System Administration Menu (
) and select
The system displays the Voice Equipment screen (
2. Press
(CHG-KEYS).
#
> Voice Equipment
>Configuration Management
F8