Deck Mount Installation
Diagram 1
Anchor Well Installation
Using An Anchor Roller
Diagram 2
Anchor Well Installation
using Hawse Pipe
Diagram 3
Cuddy Cab Installation
Diagram 4
Typical Winch Installation Samples
Installation Note
For the gravity feed winch, rope can only be wound onto the drum in one direction due to its
working design - see the list below to help you work out which direction will work for your installation.
These directions are based on your view if you are standing at the steering wheel and facing towards
the bow.
Rope Installation:
Winch Motor is on the Right/Starboard side, feed the rope
over
the drum shaft.
Winch Motor is on the Left/Port side, feed the rope
under
the drum shaft.
Factory 1, 2 Network Drive Carrum Downs Victoria Australia 3201 Tel: 61 3 9708 2846 Fax: 61 3 9708 2845
sales@bellmarine.com.au
bellmarine.com.au
