TELEPHONE OPERATION
This telephone is having a general display timeout of 60 seconds, information like menu items,
caller ID, phonebook items, caller log, etc. will be displayed for this period, one can press the
BACK button to cancel the display before this timeout.
TO PLACE A CALL
1.
To make call from handset, press the TALK button on the handset. The Call Timer starts
to count. Both handset and base unit LINE-IN-USE LED indicator will light up. To make
call from base unit, press the SPEAKER button on the base.
2.
Listen for a dial tone.
3.
Dial the telephone number. The phone numbers appear on the LCD display as you enter
the number.
4.
When finished with your call for handset case, press the TALK button or place the handset
on the base/charge cradle. The handset LED will turns off, the base/charge cradle LINE-
IN-USE LED indicator will turns on to indicate charging. When finished call for base unit
case, press the SPEAKER button.
NOTE:
The call timer will start to count once you press the TALK/SPEAKER button. It will be
shown at 5th seconds after pressing this button.
TO RECEIVE A CALL
NOTE:
If you are expecting incoming calls, you will hear the ring tone on handset or base only if
their respective ringer volume setting is NOT set to OFF mode. There is always fast blinking at
the LINE-IN-USE LED indicating the ringing.
A.
IF THE HANDSET IS ON THE BASE UNIT
1.
When the phone rings, simply pick up the handset from the base/charge cradle if the unit
is set to auto-answer ON mode. If the unit is set to auto-answer OFF mode, press the
TALK button. See AUTO ANSWER ON/OFF for details of setup. The LCD display will
shows “
TALK
”.
2.
Start your conversation.
3.
To end your conversation, either press the TALK button or place the handset on the
base/charge cradle. The handset LED indicator will turns off.
B.
IF THE HANDSET IS OUT OF THE BASE UNIT
1.
When the phone rings, press the TALK button on the handset. The LCD display will shows
“
TALK
” and the handset and base unit LINE IN USE LED will light up.
2.
Start your conversation.
3.
To end your conversation, either press the TALK button or place the handset on the
base/charge cradle. The handset LED indicator will turns off.
C.
ANSWERING ON THE BASE UNIT
1.
When the phone rings, press the SPEAKER button on the base. The LCD display will
shows “
TALK
” and the base unit LINE-IN-USE LED will light up, handsets will shows
“
LINE IN USE
”.
2.
Start your conversation.
3.
To end your conversation, press the SPEAKER button. The base LINE-IN-USE LED will
turns off.
LAST NUMBER REDIAL
1.
If you get a busy tone, press TALK button on handset (or the SPEAKER button on base
unit) to hang up.
2.
Press the TALK button on handset (or the SPEAKER button on base unit) again and listen
for a dial tone.
3.
Press the REDIAL button. This will automatically redials the last telephone number you
called (Redial can stores up to 32 digits).
4.
When finished with your call, press the TALK button on handset or place the handset on
the base/charge cradle (or the SPEAKER button on base unit). The LINE-IN-USE LED
indicator will turns off.
PAGING BETWEEN HANDSETS/EXTENSION
1. Press INT button on handset (or INT button on the base unit).
