can store up to 15 characters.
5.
Press MENU button once.
6.
Enter the telephone number using the TELEPHONE KEYPAD buttons (0-9). You can
store up to 24 digits.
7.
Press MENU button to save into current memory location and goes back to Standby
mode.
NOTE:
The above procedure will overwrite current location if it is not empty. If no active
buttons are pressed for 60 seconds, the LCD display will automatically return to Standby mode.
NOTE:
for the operation of multi-tap input, please refer to Telephone Keypad Characters
section for more detail.
VIEWING THE PHONEBOOK
This 20 memories Phonebook lets you stores 20 records each of 15character names and
24digits number, it is a location dependent phonebook and you can scroll through the list by
arrow buttons.
1. Press the MEM button.
2. Press the UP or DOWN button to find the one you need, If number is more than 1 page, it
will show 2 pages alternatively.
NOTE:
To exit the Phonebook at anytime, press the BACK button.
EDITING NAME AND NUMBER IN THE PHONEBOOK
1.
Press the MEM button.
2.
Press the UP or DOWN button to find the one you want to edit.
3.
Press MENU button to edit the name.
4.
Use DEL button to erase existing characters one by one and use the TELEPHONE
KEYPAD buttons (0-9) to re-enter the name by multi-tap input. (up to 15 characters)
5.
Press the MENU button once.
6.
Use DEL button to erase existing digits one by one and use the TELEPHONE KEYPAD
buttons (0-9) to re-enter the number. (up to 24 digits)
7.
Press the MENU button to confirm and save the change.
IMPORTANT:
It is not advisable to save a telephone number without the corresponding name
in the Phonebook.
Note:
When no active buttons are pressed for 60 seconds, the LCD display will automatically
return to Standby mode.
PLACING CALLS FROM THE PHONEBOOK
1.
Press the MEM button.
2.
Press the UP or DOWN button to find the one you want to call.
3.
Press the TALK button on handset (or SPEAKER button for base unit case) to dial out the
telephone number.
4.
Start your conversation when call is connected.
5.
To end your conversation, either press the TALK button on handset or place the handset
on the base unit (or press the SPEAKER button for base unit case).
NOTE:
Be sure to check that the line is not being in use by another parallel phone.
DELETING A STORED NUMBER IN THE PHONEBOOK
1.
Press the MEM button.
2.
Press the UP or DOWN button to find the one you want to delete.
3.
Press the DEL button. The unit will prompt you the deletion of the current phonebook
entry and the LCD display will show “
DELETE RECORD?
”
4.
Press again the DEL button to delete. The LCD display will shows “
DELETED!
” and
returns to Standby mode.
