36240 English I/B version 11259B-1
11259B-1 12
OWNER
＿
＿
S MANUAL#
36240
VER. 11259B-1
PAGE:
12
English Canadian Version
Press the TALK button to answer or place a call using the headset. Refer to the
manufacturer headset manual for more details.
POWER INSTALLATION
BASE UNIT POWER CONNECTION
CAUTION:
You must use a Class II
,
120 VAC
Input
/
9VDC Output
adapter that
delivers at least 300 milliampere. The plug must correctly fit the base unit's adapter
jack.
1. Plug the adapter into a standard AC outlet.
2. Insert the small plug into the adapter jack on the rear of the base as shown in
(Figure 9)
HANDSET BATTERY INSTALLATION
CAUTION:
Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit.
Use of other battery type may cause injuries or damage.
1.
Remove the battery compartment cover of the handset.
2.
Connect the rechargeable Ni-Cd battery as shown on Figure 10.
9VDC
Adapter
Jack
Line
Cord
Telephone
Modular Jack
Telephone
Modular Jack
9VDC Adapter
Plug
Inset the End of
the Battery
Pack Wire
BLACK WIRE
Handset
Battery
Compartment
RED WIRE
