background image

Your BE-3872 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please
read the following maintenance instructions.

1. Keep the BE-3872 away from heat as high temperatures can shorten the life

of the electrical components and distort or melt its plastic parts.

2. The BE-3872 should be kept free of dust and moisture. If it gets wet, wipe it

dry immediately. Liquids can contain minerals that can corrode electronic
circuits.

3. Handle your BE-3872 gently and carefully. Dropping it can cause serious

damage to circuitry, or the plastic case, which may result in malfunction.

4. Do not use any type of chemical or any abrasive powder to clean the

cabinet. Use only mild detergents on a soft, damp cloth to clean the BE-3872
telephone.

5. The BE-3872 has built-in surge protection circuits that meet or exceed FCC

requirements. However, an incident such as a lightning strike at or near the
telephone lines, could cause serious damage.

6. If the BE-3872 is installed in an area with frequent or severe electrical

storms, it is suggested that the telephone be disconnected during these
storms or that additional surge suppression equipment be added to the
installation.

7. In the case of trouble with the telephone, do not attempt to repair the

telephone yourself. It is the responsibility of users requiring service to report
the need for service to our Service Department. They will make the
necessary arrangements for repair or replacement.

8. If you should have any questions about the operation of your BE-3872

telephone, please call our Service Department at 

1-800-276-5844

. Or you

may contact TT Systems LLC for technical assistance via our Internet Web
site:

www.ttsystems.com

or e-mail:

tech@ttsystems.com

.

9. Please register your product online at

www.ttsystems.com/CustomerSupport/RegOnline.asp

CARE AND MAINTENANCE

32

Aastra Telecom

A. Aastra warrants that the BE-3872 sold by Aastra within the continental limits of the

United States, Hawaii and Alaska, is free from defects in materials and
workmanship under normal use and service for 1 year. This warranty is applicable
only to the original purchaser of the BE-3872, when accompanied by a sales
receipt stating the date of purchase and name of the company from which
purchased. This warranty is in lieu of and excludes all other warranties, expressed
or implied, including any implied warranty of merchantability or fitness, and of any
other obligation on the part of Aastra.

B. If the BE-3872 shall prove to be defective, then Aastra shall either replace or repair

the BE-3872 at its discretion as follows:
1. At no cost to the original purchaser except shipping charges, within 90 days of

the date of purchase.

2. Warranty service for your BE-3872 is provided by TT Systems LLC From 91

days to 365 days, you may return the BE-3872 to TT Systems LLC at the
following address:

TT Systems LLC

4 Executive Plaza

Yonkers, New York  10701

Tel: 914-968-2100

C. Shipping charges are at the customer's expense. Please include a copy of your

sales receipt and a check or money order made out to TT Systems LLC for the
amount of $14.95 to cover shipping and handling.

D. There is no informal dispute settlement mechanism available.
E. Some states do not allow limitations on how long an implied warranty lasts and/or

do not allow the exclusions or limitations of incidental or consequential damages,
so the above limitations or exclusions may not apply to you.

F. This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

G. This warranty does not extend to any BE-3872 sold by Aastra which has been

subjected to misuse, neglect, accident, improper application, improper installation
or to use in violation of the instructions furnished by Aastra. This warranty does not
extend to or apply to any BE-3872 which has been repaired or altered by any
persons who have not been expressly approved by Aastra.

H. Aastra shall not be liable for any special or consequential damages or for loss or

expense directly or indirectly arising from use of the products or any inability to use
them either separately or in combination with other equipment or product acces-
sories or from any other cause.

I.

Aastra reserves the right to make changes in the design of the BE-3872 and to
make additions or improvements to the BE-3872 without incurring any obligation to
modify any BE-3872 previously sold.

31

WARRANTY

Summary of Contents for BE-3872TF



















Reviews: