2
BellAire™ Model 3000 Tire Inflator Instructions • Mode d’emploi du gonfleur de pneu BellAire™ Modèle 3000
INTRODUCTION
TABLE OF CONTENTS
Introduction
____________________________________________________________________2
Featured Product Illustrations
____________________________________________________3
General Safety Rules and Warnings
_______________________________________________4
Inflator Operation
_______________________________________________________________5
Inflating Tires_________________________________________________________________5
Inflating sports balls or other high pressure small inflatables__________________________5
Work Light___________________________________________________________________6
Maintenance
____________________________________________________________________7
Trouble Shooting
________________________________________________________________7
Warranty
_______________________________________________________________________8
Notes_____
______________________________________________________________________9
Contact Us
_____________________________________________________________________16
Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
DESIGNATION/EXPLANATION
Safety Alert
Read The Operator’s Manual
Eye Protection
Wet Conditions Alert
Hot Surface
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and under-
stand operator’s manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injury or damage, avoid contact
with any hot surface.
Your new inflator provides up to 150 PSI (10.34 bars) and must be connected to a 15 amp
12 Volt DC power outlet. The BellAire™ 3000 includes a high pressure inflator for vehicle
tires and sports balls. This model also includes an inflation pre-set and automatic shut-off
feature and a flexible LED work light.
INSPECT INFLATOR AFTER UNPACKING
After unpacking your inflator, carefully inspect the inflator to ensure there is no
damage that may have occurred during transit and verify all components have been
included as listed and shown on page 3.
IMPORTANT! READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
USE THIS INFLATOR. FAILURE TO FOLLOW WARNINGS AND COMPLY WITH
ALL INSTRUCTIONS COULD RESULT IN FIRE, PROPERTY DAMAGE OR INJURY TO
PERSONS.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.
OPERATE INFLATOR WITH 15 AMP 12 VOLT DC CIGARETTE LIGHTER SOCKETS
OR 12 VOLT POWER OUTLETS ONLY. DO NOT USE WITH OLDER 8 AMP CIGA-
RETTE LIGHTER RECEPTACLES.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
Summary of Contents for BellAire 3000
Page 9: ...9 NOTES REMARQUES...
