Bellagio Luxury MT-NR1401 Instructions Of Installation And Use Download

Page: 4 / 6

1. Open the accessory box 2 as pic.
shows

2. Put the shower head into the bathtub
in right position as pic. shows

3. Distinguish water inlet pipe

4. Screw it

5. Side up the bathtub, then install
downcomer

6. Use thread sealing tape to wrap
around the drain hole

7. Make the thread sealing tape smooth

8. Fasten the drain tube

9. Put downcomer into the drain hole on
the ground

11. Put plugs into the drain hole

10. Drain sewage of the tube, then
connect the cold and hot water
pipe separately

2. Install pillow

Installation Process

Installation

rocess

Summary of Contents for MT-NR1401

Page 1: ...MT NR1401 Massage Bathtub Instructions of Installation and Use ...

Page 4: ...ub then install downcomer 6 Use thread sealing tape to wrap around the drain hole 7 Make the thread sealing tape smooth 8 Fasten the drain tube 9 Put downcomer into the drain hole on the ground 11 Put plugs into the drain hole 10 Drain sewage of the tube then connect the cold and hot water pipe separately 12 Install pillow 06 05 Installation Process Installation rocess P ...

Page 5: ...ll automatically cut off the circuit if the current is too high 2 Volume control Unique Point 13 Seal the barthtub edge by silicon glue as follows 3 Waste water free piping system 08 07 Installation Process Installation rocess P ...