04
03
Preparations
Bathtub Configuration
Installation of Electric Appliance
1. Electric Parameter
Installation of Water Supply
Preparations
Pillow
Small jet
Faucet
Hand shower
Drainer
Waterfall
Suction
Underwater light
Regulator
Big jet
Rated Voltage Rated Frequency
Max Rated Power
Rated Current
220V 50Hz 2260W 10.3A
Cold water
Hot water
drain hole
electric outlet
Installation of Electric Appliance
1
3
8
Item
Description
Description
Item
6
7
9
10
11
5
2
4
3.There should be electric-leakage protector on the power supply. Power lines must be fixed
ones, which are with good ground line. The section of the electrical wire should not be less
than 2.5 m². The power supply appliance should be in accordance with the National Safety
Standard. And connect the protective ground line on the ground line- mark of bathtub frame
(The electric-leakage protector is prepared and connected by user).
2.All electrical connections should be made by a licensed ,locally certified electrician,In
accordance with the requirements of the requirements of the national electrical codes
and procedures.
4.Warning: when using electrical products, basic precautions should always be followed,
including the following.
5.Danger: risk of electric shock! connect only to circuits protected by a Ground Fault Circuit
Interrupter (GFCI). A GFCI is not supplied, however, we do specify its use. all known code
authorities require a GFCI.
1
2
3
4
5
6
7
8
10
11
9
Switch
1200
MM
700
MM
35
0-
40
0M
M
56
0m
m
1440
mm
