15
37000
WARRANTY
1-Year Limited Warranty
Bell Automotive® Products, Inc. warrants that for a period of one year from the date of original retail purchase, this
product will be free from defects in material and workmanship. Bell Automotive® Products, Inc., at its option, will repair
or replace this product or any component of the product found to be defective during the warranty period. Replace-
ment will be made with a new or remanufactured product or component. In the event the product is no longer available,
replacement may be made with a similar product. No warranty is provided on batteries and lighting components. This is
your exclusive warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep
the original sales receipt. Proof of purchase is required to obtain warranty coverage.
What This Warranty Does Not Cover
This warranty does not cover normal wear of parts, parts that are not genuine Bell Automotive® parts, or damage result-
ing from any of the following: negligent use or misuse of the product; use on improper voltage or current; commercial use
of the product; use other than the operating instructions, disassembly, repair or alteration by anyone other than Bell Auto-
motive® Products, Inc. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.
Bell Automotive® Products, Inc. shall not be liable for any incidental or consequential damages caused by the breach
of any express or implied warranty or conditions, except to the extent prohibited by applicable law, any implied war-
ranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty or
conditions. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to
province.
The costs of transporting the product to Bell Automotive® Products, Inc. for warranty service are the responsibility of the
purchaser.
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE
If you have any questions regarding this warranty please write or contact us through our website:
Bell Automotive® Products, Inc.
Attn: Customer Service
18940 N. Pima Road, Suite 200
Scottsdale, AZ 85255
www.bellautomotive.com
Pressure gauge appears to read incorrectly or is unreadable:
•
Make certain when you attach the air hose nozzle to the tire stem that the gauge is reading the current tire pressure
before turning on the inflator switch. Main power switch must be on for pressure gauge to be on. See #1 in figure 1.
•
Remove the 12 Volt plug from the power source for 5 seconds and plug back in.
The inflator is running but the tire is not inflating:
•
Turn off the inflator and check that the air hose nozzle is securely attached to the tire valve stem.
Digital display shows ERR message:
•
Insert the 12 Volt power plug into the vehicle’s 12 Volt lighter socket or power socket. Do not connect the air hose
nozzle to the tire valve stem. Let the gauge adjust for a few seconds. Press and hold the “R” reset button for a few
seconds. See #5 in figure 1. This will reset the pressure sensor. If the problem persists, the pressure sensor has failed.
Please contact Bell Automotive® Products customer service. See contact information section.
