background image

4

BellAire™ Model 7000 Tire Inflator Instructions

• 

Keep children and others away while operating inflator.

• 

Keep the inflator dry, clean and free from oil and grease.  Always use a clean cloth when cleaning.  Never use  
typical vehicle fluids such as brake fluid, gasoline, any petroleum products or strong solvents to clean inflator.

• 

Operate inflator in an open area and away from any objects that could restrict the flow of air to ventilation    
openings.

• 

Do not operate inflator near fire, flammable liquids or in gaseous or explosive atmospheres.

• 

Always wear eye protection.

• 

Always use in a safe area away from traffic and other dangers.

• 

Do not attempt to disassemble inflator.  No user serviceable parts inside.  Only user serviceable part is fuse 
replacement.  See maintenance section on page 14.

• 

Before each use, always check inflator hoses and 12 Volt cord for weak or worn condition and make certain 
all connections are secure.  Do not use if a defect is present.

• 

Do not pull or carry the inflator by the power cord or air hose.

• 

Do not over stretch power cord or air hose.

• 

Never point an inflator air hose toward yourself, others or animals.

• 

Never start a vehicle with the inflator plugged into the DC 12 Volt power socket.  See operation instructions 
on pages 5 through 13.

• 

Use the inflator for its intended use only.  Do not alter or modify the inflator.

• 

Do not insert metal objects into the DC 12 Volt power outlet.  Doing so may blow the inflator fuse.  

• 

Do not store inflator in a damp or wet location.  Protect the inflator from rain, snow or other moisture 
sources.

• 

When not in use, make certain the main power switch is in the off position. See #1 in figure 1, page 3.  Store 
inflator out of the reach of children.

• 

IMPORTANCE OF PROPER TIRE PRESSURE

 

— Correct tire pressure is vital to road safety.

 

— Correct tire pressure can help improve vehicle fuel economy.

 

— Regularly check tires on vehicles to meet manufacturer’s recommended tire pressure.

 

— Always check pressures at ambient temperature, never check immediately following a long trip.

• 

RECHARGEABLE BATTERY CAUTIONS 
The inflator’s internal rechargeable battery must be charged before the initial use and at least once every 6 
months.  If the power is completely drained from the battery and not recharged within a month, the battery 
may not be rechargeable.  Turn main power switch to the off position before storing inflator for any length of 
time.  See #1 in figure 1.

 

— 

Do not

 continue to operate the inflator when the red battery indicator light is on by itself.

 

— Only use the AC adapter, included with this inflator, for recharging the internal battery.

 

— Plugging into a cigarette light socket or power socket does not recharge the internal battery.  Only the AC  

 

                      adapter, included with this inflator, will recharge the battery.
 

— 

Do not

 charge the battery at temperatures below 40 °F (5 °C) or above 105 °F (40 °C).

 

— 

Do not

 operate the inflator with the AC recharging adapter connected to the inflator to avoid damage to the 

                      charging adapter, internal battery or inflator.  

Improper connection of the AC recharging adapter while

 

    operating the inflator may void the warranty.

 

— Never operate the inflator near fire, flammable gas or liquid.

• 

WARNING: COMPRESSED AIR CAN BE DANGEROUS

 

— Never allow children to use this inflator.

 

— Never leave inflator unattended while running.

 

— Never over-inflate items.  Over-inflation could cause property damage or personal injury.

 

— Check manufacturer’s recommended inflation pressure before starting the inflation process.

• 

WARNING: VEHICLE EXHAUST WITHOUT PROPER VENTILATION IS EXTREMELY DANGEROUS

 

— Never start and leave a vehicle running in a confined or enclosed space such as a garage.  Start and run

 

    vehicles outdoors.

GENERAL SAFETY RULES and WARNINGS

Summary of Contents for 7000

















Reviews: