222
Trouble Shooting
Cause
Solution
Light
on,
but
motor
does
not
work.
The blades are blocked.
The capacitor is damaged. Replace
capacitor.
The motor is damaged.
Replace motor.
The internal wiring of motor is cut off /
disconnected. An unpleaseant smell
may be produced.
Replace motor.
Both
light
and
motor
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Connect the wires as per the
electric diagram.
Oil leakage.
Outlet and the air ventilation entrance
are not tightly sealed.
Take down the outlet and seal with
glue.
Leakage from the connection of
U-shaped section and cover.
Take U-shaped section down and
seal with soap or paint.
Vibration.
The blade, if damaged, can cause
vibrating.
Replace the blade.
The motor is not tightly fastened.
Fasten the motor tightly.
The cooker hood is not tightly fixed.
Fixed the cooker hood tightly.
Insufficient suction.
The distance between the cooker
hood and the cooker top is too large.
Readjust the distance.
Too much ventilation from open doors
or windows.
Choose a new place to install the
appliance or close some doors /
windows.
The machine inclines.
The fixing screws are not tight
enough.
Tighten the fixing screw and make
it horizontal.
The hanging screws are not tight
enough
Tighten the hanging screw and
make it horizontal.
do
not
work.
.
Fault
Electrical Diagram
Electrical diagram see label on main body of the actual product.
9
