cleaning
ReMOVing OVen PaRTS FOR cleaning
inner Door glass
• The inner door glass panel can be
removed for cleaning but it must be
replaced the right way up. If there is any
writing on the glass, you must be able to
read it clearly when the cavity doors are
open.
• Always make sure that the glass is
pushed fully into the Stop position.
• To remove the glass panel, open the
door wide, hold the top and bottom edges
and slide out.
•
Warning: DO nOT
operate the appliance
without the glass panel correctly fitted.
• For your safety, glass door panels are
made of toughened glass. This ensures
that, in the unlikely event that a panel
breaks, it does so into small fragments to
minimise the risk of injury. Please take care
when handling, using or cleaning all glass
panels, as any damage to the surfaces
or edges may result in the glass breaking
without warning or apparent cause at
a later date. Should any glass panel be
damaged, we strongly recommend that it
is replaced immediately.
Shelf Runners
• Shelf runners can be removed to
enable you to clean then thoroughly.
Make sure they are cool to touch and then
grasp the runners and slide out of their
hanging holes.
1
CLEANING
REMOVING OVEN PARTS FOR CLEANING
Inner Door Glass
•
The inner door glass panel can be removed for cleaning
but it must be replaced the right way up. If there is any
writing on the glass, you must be able to read it clearly
when the cavity doors are open.
•
Always make sure that the glass is pushed fully into the
Stop position.
•
To remove the glass panel, open the door wide, hold the
top and bottom edges and slide out.
•
Warning: DO NOT operate the appliance without the
glass panel correctly fitted.
•
For your safety, glass door panels are made of toughened
glass. This ensures that, in the unlikely event that a panel
breaks, it does so into small fragments to minimise the
risk of injury. Please take care when handling, using or
cleaning all glass panels, as any damage to the surfaces
or edges may result in the glass breaking without warning
or apparent cause at a later date. Should any glass panel
be damaged, we strongly recommend that it is replaced
immediately.
Shelf Runners
•
Shelf runners can be removed to enable you to clean then
thoroughly. Make sure they are cool to touch and then
grasp the runners and slide out of their hanging holes.
gaS HOB
Burner caps and heads
• The slots in the burner head where the
flames burn should be cleared of deposits.
• Clean with a nylon brush, rinse and
then dry thoroughly. There may be brown
coloured markings on your burners; these
are carbon deposits or fat stains and can
be removed using a soap filled pad.
• Do not put burners in the dishwasher
or soak them. Using dishwasher powders,
washing up liquids and caustic pastes can
damage the burners.
• Burner caps and heads must be
repositioned correctly so that they sit
squarely on to the hob as shown. This is
particularly important with stainless steel
models as failure to reposition the caps
correctly may result in discolouration of
the stainless steel around the burners.
1
CLEANING
GAS HOB
Burner caps and heads
•
The slots in the burner head where the flames burn
should be cleared of deposits.
•
Clean with a nylon brush, rinse and then dry thoroughly.
There may be brown coloured markings on your burners;
these are carbon deposits or fat stains and can be
removed using a soap filled pad.
•
Do not put burners in the dishwasher or soak them. Using
dishwasher powders, washing up liquids and caustic
pastes can damage the burners.
•
Burner caps and heads must be repositioned correctly so
that they sit squarely on to the hob as shown. This is
particularly important with stainless steel models as failure
to reposition the caps correctly may result in
discolouration of the stainless steel around the burners.
Summary of Contents for FSDF 60
Page 1: ...Users Guide Installation Handbook Belling Freestanding Dual Fuel AU ...
Page 34: ......
Page 35: ......
