background image

UsInG tHe HoB

timer auto switch off

The timer can be set to automatically turn 

off a cooking zone.
All four cook zones can be simultaneously 

timed to turn off automatically.
cook zones can be set for a maximum 

time of 99 minutes.

Warning!

Never leave the hob unattended when in 

use, even when you have set the timer to 

turn off the cook zone.

to operate.

1) Select the cook zone to be timed, 

ensure power level is already set before 

selecting timer.

2) Select the timer, the flashing indicator 

on the timer display means the timer is 

ready to be set for that particular zone.

3) Set the right hand digit up to 9 minutes 

(Single Minutes Units) and wait a couple 

of seconds.

4) The display will now indicate for you to 

set the left hand digit, up to 90 minutes 

(10 Minute Units), and wait a couple of 

seconds. Skip this step if you want set 

the timer for less than 10 mins, leave the 

timer for a few seconds at it will automati-

cally set and start counting down.

5) The timer indicator in the timer display 

stops flashing and remain lit, the timer is 

now set and begins counting down.

When the time is up

1) The corresponding indicator in the 

timer display will flash, the timer will 

beep, and the cook zone will automatically 

turn off, (The cook zone will display H if 

the surface is hot).
2) Touch any control to stop the beeping.

additional timer information

To modify or cancel a timer setting follow 

steps 1) to 5) above.

To set the timer for additional zones fol-

low steps 1) to 5) above.

If multiple zones have been set for timed 

operation , the timer display will always 

display the time for the cook zone with 

the shortest time remaining.
To check the timer setting for a different 

cook zone, simply select the required cook 

zone, the remaining time will briefly ap

-

pear in the timer display.

Summary of Contents for IH60XL





























Reviews: