5
Getting to Know Your
Bellini Coffee Capsule
Machine
Suitable with Nespresso
capsules
Congratulations on the purchase of your new
Bellini Coffee Capsule Machine.
Before first using your new Coffee Capsule
Machine, it is most important that you read
and follow the instructions in this use and care
booklet, even if you feel you are familiar with this
type of appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a
safe and convenient place to keep this booklet
handy for future reference.
This appliance has been designed to operate
from a standard domestic power outlet. It is not
intended for industrial or commercial use.
Before first use
Remove and safely discard any packaging
material and promotional labels.
Wash the water tank, drip tray, capsule
collection tray and cup holder grid in warm
soapy water and dry thoroughly. These parts are
not dishwasher safe. Use a damp cloth to clean
the outside of the unit.
Check that all accessories are complete and
the unit is not damaged. Add water into water
tank, place a cup on the cup holder grid, insert
the plug into a standard domestic power outlet
and switch on. Turn on the ON/OFF switch and
the red Cup button indicator light will illuminate,
the appliance will then start to preheat. The Cup
buttons indicator lights will not turn off until the
ON/OFF switch is switched off. Wait until the blue
indicator Cup Button light has illuminated. Once
they illuminate in blue light, press the
Lungo (large) Cup Button, the hot water will
flow out from the coffee nozzle. Repeat this
procedure and press the Cup button until the
cup is filled with hot water. Clean all detachable
parts thoroughly.
Note: When you press the coffee button,
the machine may produce a pumping
sound, this is normal.
Using the Bellini Coffee
Capsule Machine
Suitable with Nespresso
capsules
1. Fill the detachable water tank with cold
water. Take care not fill above the “MAX”
water level mark on the tank.
2. Open the handle by lifting it and insert a
Nespresso® Coffee Capsule only.
Close the handle by pushing it down directly.
Note: Never insert your finger into the
capsule holder.
3. Put the power plug into a standard domestic
power outlet and switch on. Turn on the ON/
OFF switch and the red indicator light will
illuminate. Wait until the blue indicator cup
buttons illuminate.
Caution:
During the brewing process, never
open the handle; otherwise the coffee capsule
will be expelled into the collection tray.
4. Position a cup on the cup holder grid. Make
sure the drip tray is assembled in place.
5. Once the red indicator light around the Cup
Buttons is turn off, and the blue indicator light
illuminates, it means the preheating is finished,
you can make coffee by pressing the Lungo
(large) cup button (approx. 60ml) or Espresso
(small) cup button (approx. 30ml), the coffee
will flow out from the coffee nozzle. Once
the desired quantity has been reached,
the flow will stop automatically. Or you can
stop it by pressing the Espresso (small) cup or
Lungo (large) cup button at anytime during
brewing. Leave the cup in place for up to 30
seconds to catch dripping coffee.
6. Once you have made a coffee always expel
the capsule. Capsules are automatically
expelled into the capsule collection tray by
opening the handle.
®
®
