5
2.
Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse the
opening direction:
Open the door at 90 degrees and keep it steady.
Unscrew the two screws
①
from the right lower hinge
②
[Figure 1].
Pull the door
⑤
outwards slowly [follow the arrow direction in Figure 2] to get off
the
lower hinge
②
and continue to pull the door
⑤
downwards slowly
to remove
the door entirely and away from the top Right hinge
④
now remove lower hinge
plate by undoing bracket retaining screws attaching bracket to cabinet
[Figure 2].
Unscrew top right hand hinge bracket from cabinet, retain both hinge brackets for future
use
if
you want to restore door back to original position. Figure 3]
Provided with the appliance inside a polybag are the left hand side hinge brackets
to suit lefthand door fit, install these hinge brackets in reverse order of removing
bracket from the righthand side.
[Figure 4]
Turn the door around 180 Degrees so door hinge
hole
s now face the lefthand
side,mount the lower hinge plate to the bottom of the door and secure.
Lift door into place and interlock top of the door with hinge pin, align bottom of the
door holes on cabinet hinge bracket and secure with two screws.
Lefthand door fit is now completed.
