12
Screen saver
The Screen saver is activated as a function of the time selected in the
Standby timer menu item. You can use any number of custom images
as a Screen saver. Please note that only image files can be used. Save
these in the „995SAVER“ system folder on your SD card. They need to
be saved in the following format in order to work:
Example: XXX00001.jpg
XXX = max. 3 characters
12345 = max. 5 digits
.jpg = file format
The files need to be numbered in sequential order: XXX00002.jpg,
XXX00003.jpg, etc. The image size should match the LCD display
resolution of 480 x 272 pixels. Pictures which are not this size are
automatically cropped to the correct proportions.
How to change the Screen saver:
1. In the Setup menu, you can navigate
with the
buttons and select
Screen saver.
2. Use the right rotary knob to adjust the
selection. (Stop/ Play)
3. Then press the button to confirm.
Standby timer
The Standby timer allows you set a time at which the kitchen machine
automatically switches to Standby mode. After, for example, 1 minute
in Standby mode, the display switches off if there is no Screen saver
activated (see Screen saver).
How to change the Standby timer:
1. In the Setup menu, you can navigate
with the
buttons and select
buttons and select
Standby timer.
2. Use the right rotary knob to adjust the
selection.
3. Then press the button to confirm.
Language
How to change the language:
1. In the Setup menu, you can navigate
with the
buttons and select
buttons and select
Language.
2. Use the right rotary knob to adjust the
selection.
3. Then press the button to confirm.
Volume
Use this setting to adjust the volume of the beeps emitted when you switch
on/off, when the device reaches temperature or when time is up.
How to change the volume:
1. In the Setup menu, you can navigate
with the
buttons and select
buttons and select
Volume.
2. Use the right rotary knob to adjust the
selection.
3. Then press the button to confirm.
Slide show
Use this setting to customise the display of images in Screen saver mode.
How to adjust the slide show:
1. In the Setup menu, you can navigate
with the
buttons and select
buttons and select
Slide show.
2. Use the right rotary knob to adjust the
selection.
3. Confirm your selection by pressing the
button.
