16
Kitchen machine safety settings
in the menu options:
Recipe cooking, Recipe favorites
and My recipes
Pre-programmed settings
The „This step is about to end.“ note appears on the display after 80%
of the pre-programmed time (20% time remaining). For example, if the
processing time is 5 minutes, the kitchen machine beeps when there is
1 minute left to go.
If you do not adjust any more settings after this step, the heating automa-
tically switches off and the kitchen machine continues to run for a further
1 to 5 minutes, depending on the length of the recipe step. This prevents
the food sticking where possible. After this time, the kitchen machine
automatically exits the recipe and reverts to the category overview. You now
have the option of using the
button to revert back to the next step of the
recipe or stopping the cooking process completely using the button.
If you adjust the pre-programmed recipe processing time manually by
overriding the safety prompt (20% of preset time remaining), then the
message ‚This step is about to end.“ does not appear. However, other safety
mechanisms as described above do kick in. The heating switches off at the
end of the processing time. The motor stops after a defined period.
18. You now have the option of using
YY
the button to extend the current
process with the new settings you
have selected.
OR
20. If you wish to extend the process
manually as described in step 18,
the image shown to the left appears.
Once you have worked through the
settings, the kitchen machine reverts
to step 19 and you can continue
working through the steps.
This loop is repeated at the end of
every step.
19. Press the button to continue
working through the recipe.
21. If you do not do anything by the end
of the loop and the safety time runs
out, the motor switches off. The
image shown to the left appears.
22. Press the
button and revert back
to the next step in the recipe which
has already started.
23. Use the button to exit the Recipe
cooking mode.
7.
9.
8.
10.
