Bellman & Symfon VISIT BE1551, User Manual

If

Try this

Nothing happens when I 

press the smoke alarm test 

button



  Check that the battery contacts are firmly connected.



  Replace the smoke alarm battery. Only use a Duracell 

MN1604 alkaline battery.



  Check the age of the unit, see the “replace by” label on 

the sidewall of the unit.

The smoke alarm beeps 

when I press the test button, 

but the Visit receiver is not 

responding



  Check the smoke alarm battery and the receiver batteries 

and connections.



  Move the receiver closer to the smoke alarm to make sure 

it’s within radio range. 



  Check that the units are set to the same radio key, see 

Changing the radio key

.

The Visit receiver is activated 

for no apparent reason



  Change the smoke alarm battery if the red Visit LED on 

the receiver blinks every 5 s, see 

Signal pattern

.



  If the problem persists, there is probably another Visit 

system nearby that triggers yours. Change the radio key 

on all units, see 

Changing the radio key

.

The smoke alarm beeps 

and chirps for no apparent 

reason



  Check for fumes, steam, etc. from the kitchen or bathroom. 

Paint and other fumes can cause nuisance alarms.



  Check for any sign of contamination such as cobwebs 

or dust. If necessary, clean the alarm, see 

Cleaning your 

smoke alarm

.



  If the problem persists, the smoke alarm is defective and 

needs to be replaced.

Troubleshooting

Most problems with the smoke alarm can be solved quickly by following the advice below.

Service and support

If the product appears to be damaged or doesn’t function properly, follow the instruc-

tions in this user guide If the product still doesn’t function as intended, contact your 

local dealer for information on service and warranty. 

Warranty conditions

Bellman & Symfon guarantees this smoke alarm (excluding the battery) for two years from 

date of purchase against any defects that are due to faulty materials or workmanship. 

This guarantee only applies to normal conditions of use and service, and does not include 

damage resulting from accident, neglect, misuse, unauthorized dismantling, or contamina-

tion howsoever caused. This guarantee excludes incidental and consequential damage. This 

guarantee does not cover costs associated with the removal and/or installation of alarms.
If this smoke alarm should become defective within the guarantee period, it must be 

returned to your local dealer, with proof of purchase, carefully packaged, and with the 

problem clearly stated. 
Do not interfere with the smoke alarm or attempt to tamper with it. This will invalidate the 

guarantee, but more importantly may expose the user to shock or fire hazards.
This guarantee is in addition to your statutory rights as a consumer.

Model, type and classification

The information is available at the back of the smoke alarm.

Product disposal and recycling information

The symbol to the left means that according to local laws and regulations your 

product should be disposed of separately from household waste. When this product 

reaches its end of life, take it  to a collection point designated by local authorities. 

Battery disposal information

This symbol indicates that the product contains batteries that according to local 

laws and regulations must be disposed of separately from household waste. Take 

used batteries to a collection point designated by local authorities.

The European Union - declaration of conformity

Hereby, Bellman & Symfon AB, declares that this product has been tested and 

approved to the requirements set out in the following standards: 

BS EN14604:2005 + AC:2008, EN 55011:2009 + A1:2010, EN 301 489-1 v1.9.2, 

EN 301 489-3 v1.4.1, EN 60601-1-2:2015 (4

th

 Edition). The declaration of performance may 

be consulted at www.bellman.com.

38

37

EN