Bells Of Steel BTZBK, User Manual And Assembly Manual

3.4 Interval CUST

OM:     

①

Press INTERVAL to select INTERVAL CUSTOM, press ENTER to enter into this mode then 

 00/XX flashes 

INTERVAL CUSTOM

         to be set along with buzzer beeps 1s. Press UP/DOWN to set 00/XX within 1~99 Circularly

. Press ENTER to confirm along with 

         buzzer beeps 1s then enter into next setting.(Figure 32)

②

The TIME continues lighting up, 

 and 0:01 will flash, press UP/DOWN to set training time within 0:00~9:59 circularly 

WORK

         (Figure 33). Press ENTER to confirm along with buzzer beeps 1s and 

 continues lighting up. 

INTERVAL CUSTOM

③

The TIME continues lighting up, 

 will flash, press UP/DOWN to set rest time 0:01~9:59 circularly (Figure 34). Press ENTER 

REST

         to confirm along with buzzer beeps 1s and 

 continues lighting up.

INTERVAL CUSTOM

④

Cycle time counts down from 3 to 0 then console start, meanwhile buzzer beeps once per second and 

 flashes once per  

READY

         second, counting displays ‘00/XX’(Figure 35).

⑤

Cycle time counts down from the preset total time and 

 flashes once per second . 

Then TOTAL TIME, DISTANCE, 

WORK

         CALORIES, WA

TTS, SPEED & RPM start calculating, counting displays ‘01/XX’(Figure 36).

⑥

Cycle time counts down from and 

 flashes once per second along with buzzer beeps(Figure 37), meanwhile 

 will flash 

REST

READY

         in last 3s(Figure 38).

⑦

The above 

③

&

④

 continue cycle counting and add 1 per each cycle, until the 

WORK setting value finished then go to End page.

⑧

In 

 mode, buzzer beeps 1s then enter into wake up mode if no any signal inputs within 30s. 

WORK

⑨

Press START button once enter into PAUSE mode, Buzzer will sound for 0.5s in every 30s. All values are displaying on LCD and 

         flashing in every 4s. If continue to stop training for 5 minutes, buzzer sounds 2s and enter to 

Wake-up mode. Press START to resume 

         workout.

⑩

Press STOP or end up training, buzzer beeps 1s then displays TOTAL TIME, DISTANCE, CALORIES for 30s, and WATT, SPEED 

         & RPM will switch to display AVG. & MAX.

each 5s.

 PULSE window will switch to display 65%, 85% MAX (Figure 21~23) 

⑪

With pulse signal input, PULSE window will display user actual pulse. Pulse window displays 

         nothing if no pulse signal input (Figure 19~20).  

⑫

Press any PROGRAM key then perform the program accordingly.

Figure 28

Figure 29

Figure 30

Figure 31

Figure 32

Figure 33

Figure 34

Figure 35

11