Page 2
INSTALLATION INSTRUCTIONS FOR PCR-5 4 CHANNEL REMOTE CONTROL SYSTEM
The
PCR-5
4 Channel Remote Control System only works as a system with the
PCR-4 or PCR-200 PAL Colour Touch Drivers.
As shown in the illustration below the system is controlled by TOUCH from the
PCT-5 Transmitter or by optional Wi-Fi Control from Android or Apple Smart Phones
and Tablets.
To control the PCR-5 Remote Control Unit by Wi-Fi the PCR-4 or PCR-200 must be
fitted with the PAL Touch-5 Wi-Fi Module (Part No. 42-PCTWF5)
The PCR-5 can be fitted with the BR-04 module to provide local control with
LED Indication. This module can also be hardwired to provide remote control with
indication.
Optional BR-04
Local Control Module
IP65
PAL Pool Lighting
Channel 5
C
ha
nnel 1 -
4
PAL Mini
4 Loads such as Pumps, Blowers, Heater, Valve Control
PAL LED Optics
PCR-4
CLASS 2 POWER SUPPLY FOR
PAL
4 WIRE LED LIGHTS
SUPPLY VOLTAGE = 100 - 240V (47 - 63 Hz)
SUPPLY CURRENT
(TYP.)
= 0.7A/115VAC, 0.3A/240VAC
OUTPUT VOLTAGE = 12V D/C
OUTPUT POWER = 50 WATTS
APPROVED TO IEC/AS/NZS 61347 NO. TUV15577EA & UL 8750
RECEIVER/DRIVER
TM
Tc :50 C
Suitable for
Wet Locations
IP65
o
E357127
LED DRIVER
4ZD6
IP65
4 CHANNEL REMOTE CONTROL
1
POWER ON
REMOTE CONTROL MODULE BTR-4
2
3
4
