EN
23
BELMASH MCS-400
10. TROUBLESHOOTING
Probable malfunctions and methods of their detection and elimination are listed in table 5.
Table 5
Malfunction descriptions
and external signs
Probable cause
Methods of elimination
The machine plugged in
electrical mains fails to start
No voltage in power mains
Check power mains voltage
by means of any other known-
working device
No contact between socket and
connecting cable plug
Eliminate the malfunction or
replace the plug
No contact in plug connector
Eliminate the malfunction or
replace the connector
Switch malfunction
Eliminate the malfunction or
replace the switch
Control pedal malfunction
Eliminate the malfunction or
replace the control pedal
Electric motor
is overheating
The machine is overloaded by inten
-
sive feeding
Reduce material feeding speed
Oil is not coming
to cutting area
No oil in the tank
Pour oil in the tank
Hose overbending
Eliminate overbending
Electric valve malfunction
Replace the electric valve
Running machine suddenly
stops
Chain wedging
Check the chain free travel
Thermal protector actuates
Start the machine again in 15-20
minutes
No voltage
Check the voltage
11. STORAGE AND TRANSPORTATION RULES
The machine is intended for storing conditions in close rooms or other rooms with natural
ventilation without artificially controlled climate, where temperature and humidity drops are
significantly lower than in open air (e.g. stone, concrete or metal with thermal insulation or
other unheated storages, located in regions of moderate and frigid climate).
When transporting or storing the machine, fix working table 2 by transportation handles 51
and hang control pedal 13 on the hook located on the frame (fig. 12).
Fixation will prevent accidental table movement when transporting in a car.
In operation mode, the transportation handles should be screwed into the threaded holes
located on the side surface of carrying handle 14.
The machine frame has hooks for winding power cord and control pedal cord.
Summary of Contents for MCS-400
