5
6
Getting Started
Using your device
Safety Tips
Five Massage Modes
1.
Pull the non-elastic strap around mat back and fasten it to its
supporter.
2.
To use massage mat at home, connect the AC adapter output
(voltage: +12V 1A) male-plug with the female -plug on the back
of the mat. Then plug the AC adapter into a wall socket (voltage:
120V/60Hz).
3.
Lie comfortably on the mat and use the hand controller to
select the desired functions.
Caution
Be careful not to damage the mat with plastic fasteners during
installation
Heat
Press the "HEAT" button to turn the heat function on or off. A
built-in thermostat is tocontrol the temperature
within a safe
range.
Note:
This product is not intended to be used as a therapeutic heating
pad. Please allow a few minutes to reach maximum temperature
1.
Always unplug cushion from the power source after using, and
before cleaning.
2.
Keep dry – do not operate in moist or wet conditions.
3.
Do not reach for the cushion if it has fallen into water – Unplug
IMMEDIATELY.
4.
This appliance must never be left unattended when plugged in.
Unplug from power source when not in use or when taking off or
putting on attachments.
5.
Use only the attachments and adapter(s) provided with this unit.
6.
Never operate the unit if it has a damaged cord or plug, or if it has
been dropped or damaged.
7.
Do not operate under a blanket, pillow or other covering. Excessive
heating can cause fire, electrical shock or injury.
8.
Before disconnecting from power source, make sure all functions
have been stopped.
9.
Do not use where aerosol (spray) products or the administration of
oxygen is being used.
10.
Do not carry this item by the power supply cord as a handle.
11.
If you have any concerns regarding your health, consult your doctor
before using this product.
12.
If you experience pain in a muscle or joint for a prolonged period
of time, discontinue use and consult your doctor. Persistent pain
could be a symptom of a more serious condition.
13.
Do not use the massage motors or heat for longer than 30 minutes.
Extensive use could lead the product to becoming excessively hot.
Should this occur, discontinue use and allow the unit to cool down
before operating. Disconnect appliance from power source when not
in use.
14.
This appliance is not intended for medical use in hospitals.
1.
Pulsate
2
.
Tapping
3.
Rolling
4.
Kneading
5.
Auto Mode
(Auto mode will
automatically change through various
massage modes while in use)
Three Intensity Levels
L
-
For low Intensity massages
M
- F
or Medium Intensity
massages
H
- For High Intensity massages
