Operation
1.
Install 4 AAA Batteries into the device. Match the positive
electrode and negative electrode in the right direction;
2.
Connect 1 pair of electrode wire into the upper left hole of the
device and another pair of electrode wire in the upper right hole.
3.
Attach the electrode pads (connecting to the electrode wire) to
the treatment area, such as shoulder.
4.
Turn the power/intensity switch knob to 1. The screen should
show P. This means the device is ready to begin treatment.
5.
Press one of the function keys to start treatment, such as shoulder
or massage.
6.
Press SPEED+ or SPEED- to adjust the speed; Rotate the Switch
Knob to adjust the intensity.
NOTE:
Start from the lowest speed and intensity, and then gradually adjust
to a comfortable level on a scale level from to 1 to 10.
Recommended Practices
1.
Duration is 10 – 15 Minutes for each treatment area.
2.
Frequency is 2 Times per day per area.
3.
Intensity and speed selections are based upon the level of your
comfort
Cleaning & Maintenance
Please use water or neutral detergent to clean the device first then
using the dry cloth to wipe it again. The electrode pads coming with
the device are disposable, and should be replaced when their
adhesiveness becomes worse. Contact the seller for replacements.
Do not let the sticky side of the pad touch anything, including greasy
finger tips.
Caution!
All servicing of this massager MUST be performed by authorized
BELMINT personnel ONLY.
Note:
The Tens Massager Package will automatically Shut OFF after 15
Minutes for your saftey.
Product Details
Massager Function
3
4
