Doc 0213860 rev L
Page 16 of 21
Not subject to issue control when printed
Tap
Hold the bot HSG in the pos as shown and insert PC cover into the HSG with the tap pointing towards the hook. Be carefull not to damage the PC
cover during reassembling as it is not an available spare part. Insert the module and gently push until it is complete in place. Mount the bat door
Hold the top HSG in the pos as shown and insert PB into the HSG with the tap pointing towards the batt door. Add bot HSG and module to the top HSG
Make sure the top and bot HSG are correct in place. Add the two pins and press them in place. Insert the hook and turn it clockwise
PB cap shown
from both sides
Replace / Reassembling
