Doc. No. 0012920 rev. E
Page 15 of 21
Microphone assembly
Silicone tube p/n 11834-01
(uncut). Cut to 3.5 mm.
Place wrap p/n 14027-002 over the wires.
Place double face tape - p/n 10038902 -
as shown and bend the wires towards it.
Q
fl
ex tubing p/n 10049101. Cut
to 5 mm. and place it over the
mic. (must not cover the edge
of the mic.).
Mic wires:
Red wire, 20 mm. p/n 15130020
Amber wire, 18 mm. p/n 15130118
Green wire, 18 mm. p/n 15130218
+
-
IN
Edge of the mic.
(Marked in red)
+
-
IN
